GTO 2004-2006

This vinyl decal is applied in the "GTO" indentation in the rear bumper.

These vinyl decals are applied over the amber side marker lenses on the front bumper.  Sold as a set of two.

This vinyl decal is applied over the existing "6.0" trunk badge to create a custom effect.

This vinyl decal is applied over the existing "5.7" trunk badge to create a custom effect.

This vinyl decal is applied over the existing "GTO" trunk badge to create a custom effect.

This vinyl decal is applied over only the "V8" portion of the Holden "V8 6.0 LITRE" badge to create a custom effect.

Select the samples you would like from the drop-down menus below. Samples measure approximately 2"x1" in size.

You will receive a refund of your sample purchase (less shipping fees) if you place an order within 30 days.

Please note that if you order multiple sets of samples, we will only refund the first sample set upon purchase.

Customize your vehicle with "Ram Air" decals in the Firebird style font. Set of 2 decals measuring approximately 5" across.

These decals can be used on the hood, fender, spoiler, or any area of your preference.

These OEM-style decals featuring the Pontiac arrowhead design on a circular background are a great way to customize your Pontiac.  Set of 4 decals.

Please note that these decals are designed to be installed on a flat surface. If the surface is not flat, these decals may not work (especially the LiquiDome variety).

This vinyl decal overlays only the "GTO" lettering on the side fender "GTO" badge, creating a custom effect.

Sold as a pair.

These vinyl decals fill only the upper black portion of the side fender "GTO" badge to create a custom effect. Be sure to check out the checker inlays as well to complete the look (sold separately).

Sold as a set of 2.

Customize your vehicle with "GTO" decals in the GTO style font. Set of 2 decals measuring approximately 10" across.

These decals can be used on any area of your preference.

Customize your vehicle with two "X.X LITRE" decals measuring approximately 8" across.

These decals can be used on the hood, fender, or any area of your preference.

This vinyl decal is applied over the red area of the Pontiac arrowhead on the front fascia.

This vinyl decal is applied over the red area of the Pontiac arrowhead on the trunklid.

These vinyl decals are applied over the red areas of the Pontiac arrowhead on each of the factory center caps.

Sold as a set of 4 overlays.

These vinyl decals are applied over the black area of the OEM center cap. Looks great when matched to your car's color scheme!

Sold as a set of 4.

These vinyl decals are applied over the "GTO" lettering embossed on the engine covers.

Sold as a pair.

These vinyl decals are applied in the recessed black area of the engine cover. You must select the appropriate engine size below to ensure proper fitment.

Sold as a set of 2.

Add some color to the interior of your Pontiac GTO with this steering wheel emblem inlay. This decal covers only the matte black area of the steering wheel emblem.

This decal does not cover the arrowhead itself.

Add a custom color to your steering wheel with this steering wheel arrowhead overlay.

Note: Due to GM Official Licensed Product requirements, this decal is not available in blue.

This vinyl decal overlays only the "GTO" lettering on the front grille "GTO" badge, creating a custom effect.  Select your grille style from the drop-down menu below (standard grille or SAP grille).  Please note that this decal is not guaranteed to fit aftermarket grilles.

This vinyl decal is applied over the existing "Pontiac" trunk badge to create a custom effect.

This black vinyl decal is applied over the 3rd brake light on the factory trunklid spoiler. Lights up with the message of your choice when the brake is applied. Fits both the standard and SAP spoiler brake light!

This vinyl decal is applied over the 3rd brake light on the factory trunklid spoiler. Lights up with your own message (maximum 10 letters & spaces) when the brake is applied. Fits both the standard and SAP spoiler brake light!

These custom decals, indicating any desired HP figure, measure approximately 5" across.  Set of 2 decals that can be used on the hood, fender, spoiler, or any area of your preference.

Redefine your GTO steering wheel with this "GTO" overlay.

This decal kit includes a pre-cut underlay to minimize the possibility of the raised arrowhead on the steering wheel emblem from showing through.

These inlays fill each of the 10 square checker indentations found on the "GTO" fender emblems. Set includes several extra decals.

Be sure to check out the fender badge inlays as well to complete the look (sold separately).

Customize your front brake calipers with these brake caliper decals. These are a great upgrade if you've repainted your calipers. Calipers on 2004 models are different from 2005+ models, please specify below.

Sold as a pair.

Please note that these decals are best applied on a clean, painted caliper and durability/longevity on an unpainted caliper is not guaranteed.

Removed your factory GTO spoiler and discovered the unsightly holes left behind? These spoiler hole overlays can be applied over the resulting holes as a temporary solution until you can have the holes repaired by a professional body shop.

4 small and 1 large spoiler hole overlay are included. We provide 2 layers of decals for added protection. LiquiDome is available as an option.

Please note that this product is intended to be a temporary solution. We do not warrant the longevity of these decals and we cannot be held liable for any damage, however caused, if these decals fail.

Removed your front license plate and discovered the unsightly holes left behind? These overlays can be applied over the resulting holes as a temporary solution until you can have the holes repaired by a professional body shop.

We provide 2 layers of decals for added protection.

Redefine your GTO steering wheel with this Holden-style overlay.

This decal kit includes a pre-cut underlay to minimize the possibility of the raised arrowhead on the steering wheel emblem showing through.

Redefine your GTO's door sill plates with these Holden-style emblems to replace the factory arrowhead inserts.

Sold as a set of 2.

These OEM-style decals featuring the Holden Lion design on a circular background are a great way to customize your vehicle.  Set of 4 decals.

Please note that these decals are designed to be installed on a flat surface. If the surface is not flat, these decals may not work (especially the LiquiDome variety).

Customize your front brake calipers with these brake caliper decals in the "Monaro" script. These are a great upgrade if you've repainted your calipers. Calipers on 2004 models are different from 2005+ models, please specify below.  Sold as a set of 2.

Please note that these decals are best applied on a clean, painted caliper and durability/longevity on an unpainted caliper is not guaranteed.

Customize your vehicle with two "LS1", "LS2" or "LSX" decals measuring approximately 3" across.

These decals can be used on the hood, fender, or any area of your preference.